Wireless Router Installation and Online Tech Support
View PDF | Print View
by: mtss.xplore
Total views: 9
Word Count: 529
Date: Fri, 20 Jan 2012 Time: 5:12 AM
Installation of wireless router is very significant. If you are unable to perform it properly then contact any online tech support. You will be able to find the best online PC tech support team’s guidance really helpful.
How can you get online assistance to make your wireless router’s installation properly?
Firstly, you should make an attempt install your wireless router, which is likely to fail. However, there is no reason to think that your router is faulty. The online tech support representative will ask you the details of how the connection is made at your place or how you wish to connect the router. You can follow the guidance of the technician and start installing your router.
Secondly, you will find in the router welcome kit a small box which has two ports in it, two cables and the router itself along with the installation CD. Often it happens that the installation of the CD gets tricky for you. Opt for online Computer Service.
Thirdly, apart from the Ethernet cable there will be another cable which you should connect with the small white box one end at the back of the router another connects with one end of the small box. Now in the other end of the box connect the landline. In this way you will establish connection between the router and landline.
Fourthly, you take out the Ethernet cable which is mostly yellow or grey in color. Plug its one end at the back of the computer USB port and other at the back of Ethernet port of your router. You will be able to establish connection between the router and the computer.
Fifthly, now switch on the internet and check whether the browser page is active or not.
Sixthly, after internet connection is active you need to go to the router’s browser page and configure the wireless connection. Type the IP address of your router that will be available in your welcome kit. If not then go to the start button and click on run. There you type ‘cmd’, a black page will come up there you will type ‘ipconfig’ and will get to know the I.P. address of your computer screen.
Then you type the IP address on the address bar and reach to the home page of your wireless router page.
Seventhly, there you need to type the name of your wireless router available at the back of it. After you enter the key you will be able to go the wireless page where you need to find the name of your own computer and select it. After selecting it will ask for the wireless key. The key is present in a card provided with the wireless router. Type the key and your wireless connection will be active.
Eighthly, last but not the least take out the Ethernet cable and check if your computer is still able to connect to the internet. If yes then the wireless router has been configured and it’s up and running.
However for performing these steps professional assistance of online tech support is wise to avail.
About the Author
Online Technical support is able to repair your wireless router too. Router configuration service is also available from them.
